Shell ; lowongan kerja migas luar negeri
Immediate opening in Shell Brunei (ASIA)
Intererested candidates who fits the requirement and wiling to
relocate, please forward your updated cv with current,
expected salary and availability to bryant@chisgroup.com
Only shortlisted candidates will be notified…
PRODUCTION SEISMOLOGIST
PRODUCTION GEOLOGIST
PETROPHYSICS ENGINEER
PRODUCTION TECHNOLOGIST
RESERVOIR ENGINEER
DRILLING SUPERVISOR
WELL ENGINEER OPERATIONS
WELL ENGINEER DESIGN
PRODUCTION SEISMOLOGISTTo carry out integrated seismic interpretation
studies (including contributions to special geophysical and geological
review studies) and to provide seismic support within a
multi-disciplinary team environment to the appraisal, development and
reservoir management. The position covers a broad range of
responsibilities aimed at optimising the value of the water injection
scheme.
Principle Accountabilities
• Identification, quantification and optimisation of secondary
recovery (water injection) opportunities in a mature
area.
• Planning and timely execution of multidisciplinary geological
studies carried out to a high standards. This
includes involvement in the delivery of well proposals, well resumes
and drilling activities.
• Initiation of and contribution to special geophysical studies
together with the geophysical section
• Involved in the Company’s Static Reservoir Model Review Panel
• Contribution to well proposals and monitoring during drilling
operations as well as the updating of geological/geophysical models
after drilling.
• Identification of requirements for data gathering and (integrated)
study work to pursue above opportunities.
• Provide input and advice for operational activities and to well
planning and well evaluations.
• Mentoring & developing young Brunei staff will be an integral part
of job.
Minimum Qualifications and experience required
• A degree in Geoscience or equivalent.
• Minimum of 8 years of experience in 3D seismic interpretation.
*****************************************************************
PRODUCTION GEOLOGIST
To provide comprehensive production and reservoir geology input within
a multi-disciplinary team environment into a full field development
studies with primary focus on maturing water flood opportunities.
Principle Accountabilities
• Work in close collaboration with multi-disciplinary team consisting
of production geophysicists & geologist,reservoir engineers,
production Technologists, Petrophysicist, well engineers and front-end
facilities engineers supported by technical assistants, study team
leader and the development leadership team to define the work scope
• Contribute to the planning and scheduling of study project and on
the key milestones such as reviews/challenge sessions, VARs, reserves
booking and reporting. Familiarity of the OPMG, V2V and the VAR
process is an advantage.
• Participate in internal and external reviews as well as audits on
studies and resource volumes, VARs- Perform basic data collection for
the study, QC and validation
• Identify, quantify and optimise secondary recovery (water injection)
opportunities in a mature area. The work will include detailed
integrated reservoir geological modelling.
• Carry out all required evaluations prior to the start of 3D static
modelling.
• Identify and assess risks and uncertainties, apply multiple
scenarios approach in the field development planning study leading to
the maturing of the development concept
• Contribute to the field development plan documentation.
• Provide support to the 3D seismic interpretation as required.
• Firm up further oil development and water injection drilling
targets, prepare the well data packs and monitor the drilling activities.
• Provide input and advice for operational activities (e.g. well
proposals, logging, testing) and well planning and evaluations.
• Mentoring & developing young Bruneian staff will be an integral part
of the job.
Skill/Competence
• Previous experience on water injection projects is highly desirable.
• Experience with static reservoir modelling is a must (preferably
able to use PETREL), experience in 3D seismic
interpretation and drilling operations (geo-steering) is desirable.
• Able to work effectively as part of a dynamic, high-performing,
multi-discipline team.
• Able to effectively communicate across all levels of the interfacing
departments and to senior management.
• A proven ability to apply innovative and cost-effective ways of
working is expected.
Minimum Qualifications and experience required
• A degree in Geology or equivalent.
• Minimum of 8 years of experience in 3D seismic interpretation.
**************************************************
PETROPHYSICS ENGINEER
To provide petrophysical engineering support within a
multi-disciplinary team environment to the appraisal, development,
reservoir studies and management of the assets within the Company’s
Asset Units.
Principle Accountabilities
• Review and analyse all available petrophysical data of his area of
studies, enhance and validate petrophysical
interpretation in order to optimise use and integration of data in the
construction of static and dynamic reservoir models.
• Provide correct integration of petrophysical information,
understanding and requirements into development plans and activity
proposals.
• Translate well objectives and business requirements into
fit-for-purpose, cost effective data acquisition strategy and programs.
• Provide operational input and support to well and reservoir
surveillance activities, e.g. well reviews, cased hole data
acquisition for reservoir monitoring, well engineering operations
planning and support, including well-site operations where necessary.
• Co-ordinate and QA/QC petrophysical log and core data acquisition
activities, and provide operational petrophysical support and
evaluation of new data acquired.
• Ensure the integrity of the corporate log database.
• Keep up to date with new technology developments within the
discipline and acquire other Petroleum Engineering disciplines basic
knowledge to allow an active participation in multidisciplinary groups.
• Coaching, mentoring & developing local Bruneian staff will be an
integral part of the job.
Skill/Competence
• Petrophysics - Skill
• Geophysics (+quantitative interpretation) - Knowledge
• Geology - Knowledge
• Reservoir engineering - Knowledge
• A proven ability to apply innovative and cost-effective ways of
working is expected.
Minimum Qualifications and experience required
• A degree in Petroleum/Chemical Engineering degree or any other
engineering/science degree
• Minimum of 8 years of experience in petrophysical and subsurface
engineering, including well-site operations experience/exposure.
• Broad experience in various logging technology and petrophysical
interpretation technique, including open hole,cased hole and core-log
evaluation.
• Experienced in Petrophysics data management and integration.
*****************************************************************
PRODUCTION TECHNOLOGIST
To provide comprehensive Production Technology expertise to the
subsurface study team in a Petroleum Engineering organisation.
Principle Accountabilities
• Provide production technology input into the study team to ensure
project value is maximised.
• Perform studies covering but not limited to sand management, smart
well deployment, completion and stimulation design.
• Implement fit-for-purpose technologies to maximise project value
• Lead a project through the well delivery process.
• Provide Production Technology input in VARs, RtLs and peer assists,
as required.
• Coaching, mentoring & developing local Bruneian staff will be an
integral part of the job.
Skill/Competence
• A good team player with track record in conducting Production
Technology studies. Experience in oil rim development and gas cap
blowdown studies would be an advantage.
• Excellent inter-personal and team skills. Experience working in a
multi-discipline and/or multi-cultural team would be advantage.
• A proven ability to apply innovative and cost-effective ways of
working is expected.
Minimum Qualifications and experience required
• A university degree in Engineering or any other related engineering
discipline.
• Minimum of 8 years in Production technology experience with field
development planning experience.
• Proficient in the use of the following tools; Prosper, IPM, Welcat.
Experience in PWRI-frac, FIST, STIM2001 and Shellfrac would be an
advantage.
*****************************************************************
RESERVOIR ENGINEER
To provide reservoir engineering contribution within a
multi-disciplinary team environment to the appraisal, development
and reservoir management of the fields. The job covers a broad range
of responsibilities including carrying out reservoir studies with the
objectives of optimising Asset performance and maximising economic
hydrocarbon recovery of the fields.
Principle Accountabilities
• Identify and quantify opportunities for appraisal, development,
production optimization and utilization of new technologies and tools.
The work may include integrated development studies utilizing detailed
integrated reservoir simulation studies and economic evaluations.
• Implement approved appraisal / development plans, and production
policies.
• Surveillance and optimisation of existing developments viz.
Identification of data gathering requirements, andproviding input and
advice for operational activities (e.g. logging, testing) and to well
operations planning and well evaluations.
• Ensure that reservoir engineering data and documentation pertaining
to the allocated reservoirs are validated and stored in a retrievable
manner.
• Support and contribute to the Hydrocarbon resource volume and
production forecasting administration, and annual Business Plan processes.
• Liaison with the shareholders to ensure timely value assurance,
budget approvals and performance reporting.
• Participate in peer assists both within Company and regionally (VtV,
VARs)
• Coaching, mentoring & developing local Bruneian staff will be an
integral part of the job.
Skill/Competence
• Experience in mature field management and secondary recovery processes.
• Experience with Exploration/Appraisal support.
• Broad experience in analytical and reservoir simulation modelling
(1D to 3D).
• Have completed all basic Core Discipline training (Reservoir
Engineering).
Minimum Qualifications and experience required
• A degree in Petroleum/Chemical Engineering degree or any other
engineering/science degree.
• Minimum of 8 years of Reservoir Engineering, including well-site
drilling and logging / well testing operations experience.
• Broad experience in various logging technology and petrophysical
interpretation technique, including open hole,cased hole and core-log
evaluation.
• Experienced in Petrophysics data management and integration.
*****************************************************************
DRILLING SUPERVISOR
• The Drilling Supervisor is responsible for the day-to-day on Site
planning and execution of drilling, completion and workover
activities, maintaining maximum Health, Safety and Environment (HSE)
and operational efficiency, at maximum value in terms of cost versus
benefits.
• Responsible for implementation of all the company’s policies,
procedures and guidelines on drilling operations,safety and
environmental protection.
• Representative on Site and is responsible for first line response
and problem solving of non planned operations.
• Provides guidance and advice to Well-site Drilling Engineers and
Assistant Drilling Supervisors and takes an active role in their
training and development.
Principle Accountabilities
• Supervise the execution of drilling, completion and workover
activities.
• Supervise the drilling contractors and service personnel to ensure
all work performed conform to safety,quality and highest value
requirements and in accordance with the well programme.
• Responsible for day-to-day optimisation of activities and provision
of first line action and problem solving in case of unexpected events.
• Provide sufficient, accurate and timely data to office based Well
Delivery Team members.
• Co-ordinate the timely supply of required equipment, consumables and
specialist services to ensure uninterrupted continuation of operations.
• In order to broaden his experience and develop his communication
skills, he may be assigned to high profile drilling activities such as
HPHT and or Deep Water Exploration Drilling.
Health, Safety and Environment (HSE)
• Ensure full Well-site compliance with the Company HSE policies and
standards.
• Conduct relevant HSE-Critical activities.
• Ensure all personnel are fully conversant with, and strictly adhere
to, their responsibilities as detailed in the
Safety Case for the respective installation.
• Set a clear leadership example and promotes a high degree of HSE
awareness among subordinates.
• Review effectiveness of rig HSE systems by inspection and audit.
Reviews effectiveness of rig HSE
communication by line inspection.
• Promote the practical implementation of the Hazard and Effects
Management Process (HEMP).
• Fulfill tasks identified in the departmental HSE Plan.
• Co-ordinate activities on the rig affecting HSE matters.
• Ensure all non-routine hazardous work is performed under the permit
to work (PTW) system.
• Ensure all near miss incidents and incidents resulting in injury or
damage to assets, equipment or the
environment are reported and that assigned incidents and near miss
events are investigated, reported and documented.
• Shall be certified PTW Authorised Signatory.
Emergency Response
• Co-ordinate the Company’s response at the Site and as On-Scene
Representative to assists the Drilling
Contractor in his function as On-Scene Commander in dealing with an
emergency.
• Is fully conversant with Company and Contractor Emergency Response
Procedures and ensures the rig and
Contractor is fully prepared for an emergency.
• Test rig site emergency preparedness at regular intervals. Shall
have attended the Company On-Scene
Commander course and be assessed competent, within 6 months of
assuming the function.
Concurrent Production and Rig Activities (CPRA)
• Is familiar with Concurrent Production and Rig Activity (CPRA)
procedures (TMS-4) and the platform specific
CPRA Safety Case and ensures that all operations are performed in full
compliance with these procedures.
• Supervise non Well Engineering staff and contractors in execution of
CPRA Third Activities.
• Take a pro-active role in the preparation and execution of CPRA
activities and ensures the weekly CPRA.
Personnel
• Promote an atmosphere of mutual trust and respect amongst all
personnel onboard the work unit or at the
drilling site.
• Provide active support to Well-site Drilling Engineers in their
development efforts, in particular in preparation for
their professional certification examinations.
• Train new Well-site Drilling Engineers in their prime roles and
responsibilities, in particular logistics
management, filing and reporting. Participates in staff appraisal
exercises.
Reporting of daily operations
• Report directly to the Well Delivery Team but functionally reports
to the Senior Drilling Engineer on all matters
pertaining to the conduct of operations at the Well-site in accordance
with the requirements of the Well Engineering
Manual.
• Input and verifies the accuracy of Well Information System (WIS)
daily drilling reports.
• Responsible for processing end of well reports, as per Well
Engineering Manual standards, for selected wells.
Contract management
• Responsible for the implementation of all relevant contracts and
their variations.
• Responsible for the monitoring and reporting of contractor service
quality.
• Inform contract holders of all service provision deficiencies and
contractor non-compliance.
Personal Development
• Maintain an active interest in and familiarizes with operations.
• Is present during the Drilling the Well on Paper (DWOP) and other
meetings taking place as part of the activity
planning process.
• Maintains the Skills Portfolio Logbook up to date.
• Performs small office based projects in well engineering subjects
during time off.
Management of costs
• Responsible for the daily expenditure and reporting using cost
reporting facility.
• Calculate the cost of services execution based on the job execution
record and contract rates.
• Minimise equipment rental time and personnel on board by the timely
and efficient transfer of materials and
personnel to and from the rig.
• Has full authority for call out of equipment and personnel.
Close out, reporting and performance monitoring
• Provide data, assists in the preparation of, and conducts well
review presentations.
• Ensure well file is kept up to date.
• Provide recommendations for improvement of the WIS and cost
reporting system, the accounts guide / coding
system and drilling rig / drilling service contracts.
• Assist in longer term operational decision making, performs cost
benefit analysis on all programmed
operational steps to ensure cost efficient operation, suggests
alternative procedures when appropriate cost benefits are
perceived.
Skill/Competence
• Possession of a valid IWCF certificate at combined surface and
sub-sea supervisor level.
• Attendance of relevant Advanced Drilling Techniques course
• Good interpersonal relations and communication skills as well as
good working knowledge of well engineering
software packages are also required.
• Able to work in teams while maintaining the capability and
flexibility for independent action
• Selected candidates will be encouraged to follow the Shell Group
“Round 2? Distance Learning Programme with
the aim of obtaining this qualification within two years.
Minimum Qualifications and experience required
• A university degree in Engineering or any other related engineering
discipline.
• Minimum 8 years Well Engineering experience of which at least 2
years as Drilling Supervisor.
*****************************************************************
WELL ENGINEER OPERATIONS
• To provide detailed planning and programming of drilling, completion
and workover activities to deliver “fit for
purpose” wells at maximum value in terms of cost versus benefits,
which meet the requirements of the Development
and/or Exploration function while adhering to Company’s policies,
procedures and guidelines on well delivery operations.
• To implement the “Delivering The Limit (DTL)” methodology. Organise
and facilitate challenge sessions
DWOP’s and AAR’s for their projects and act as operations engineer
through execution phase on some projects, for
which the “cradle to grave” principle can be applied.
• Maintain and monitor the companies lessons learned database and
ensure transfer of knowledge across the rig
teams.
• Identify opportunities to implement cost saving / value enhancing
breakthrough performance in designs with application of radical
techniques.
• Make use of global lateral learning through wells global network and
import best practice.
• To ensure Company’s HSE objectives are met.
Principle Accountabilities
Health, Safety and Environment (HSE)
• Ensures full compliance with the company’s HSE policies and
procedures as detailed in the Safety Management
System, HSE Standards and all other appropriate HSE documentation.
• Conduct relevant HSE-Critical activities as specified in the
HSE-Critical Activities Register
• Set a clear leadership example and promotes a high degree of health,
safety and environmental awareness
among subordinates.
• Review effectiveness of rig HSE management by line inspection.
Provides input to the department HSE Plan and
is accountable for follow-up and documentation of close-out of
individual and subordinates’ action points, identified in the HSE plan.
• Fully brief well-site personnel prior to safety critical /
non-routine activities such as CPRA and well testing.
• Co-ordinate the follow-up and close-out of rig related action points
resulting from near miss and incident reports and HSE visits and audits.
• Encourage well site staff in hazard awareness and risk assessment,
generation of hazard-, near miss- and incident reports, by continuous
attention and communication.
Well Planning & Execution of Operations
• Strive for full adherence to the Company Well Delivery Process
description and the associated time line
• Prepare departmental input for well proposals and ensures well
proposals are optimised with respect to well
quality, HSE and cost efficiency.
• Design wells and manages the generation of fit for purpose well
programmes.
• Maintain close liaison with the Material Scheduler to ensure forward
planning for all non-standard direct charge
material requirements ascertained from preparation of well proposals
and/or well programmes.
• Supervise and direct well-site personnel in the execution of the
ongoing and planned well operations.
• Plan and execute all well operations in full compliance with Company
procedures, policies and guidelines.
• Provide timely and accurate information to other departmental units
on operational status and any deviations
from plans, programmes, policies, procedures or guidelines.
• Facilitate short term planning and scheduling of personnel,
equipment and services required for the well operations under his
control. Ensures update of well files such as operations progress,
writing of end of well reports and reporting / documentation of
non-standard or irregular operations and events.
Concurrent Production and Rig Activities (CPRA)
• Manage CPRA involving the rig for which he is responsible.
• Ensure that the platform specific CPRA Safety Case has been issued
and the requirements have been implemented prior to starting CPRA.
• Ensure full compliance with CPRA procedures for the duration of
CPRA. Monitors co-ownership production deferment booked against CPRA
activities.
Well Tie-In
• Manage well tie-in involving the rig for which he is responsible.
• Ensure that the all approvals have been obtained and that adequate
procedures and documentation is available on the rig prior to prior to
starting well tie-in.
• Liaise with Engineering and Construction departments in matters
involving preparation for and execution of well tie-in activities.
Rig Move and Platform Access
• Schedule and attend rig move meetings and liaises with other
departments during the preparation of the actual rig move.
• Ensure rig move, involving the rig are planned and discussed with
all parties prior to execution of rig move operations.
• Verify and ensure well integrity in line with the company’s
procedures prior to performing any heavy lifts and/or approaching a
platform/well jacket with his rig.
• Ensure platform/well jacket is handed over in accordance with
procedures.
Management of Costs
• Review contents of the well proposal and challenges all aspects
where alternative more cost effective solutions are available to meet
the technical demands and requirements of the well objectives
• Compilation and submission of the Level 3 and Value of Work Done
(VOWD) Cost Estimates using the approved procedures and formats
(software).
• Challenge and verifies all available cost data for inclusion in cost
estimates to ensure required accuracy is
achieved. Monitors and challenges the reported daily cost using the
approved cost reporting facilities.
• Monitor the accumulating well cost versus the planned cost,
reporting all variances to the departmental units as appropriate.
• Prepares any programme amendment costings as required and ensures
necessary approvals are obtained.
Close Out, Reporting & Performance Monitoring
• Ensure the Drilling Supervisor prepares end of the well reports in
the approved format.
• Provide feedback to other departmental units on the use and
recommendations for improvement of the software programmes in place.
• Provide feedback to the contracts section on the use and
recommendations for improvement of the drilling rig and drilling
service contracts.
• Provide input for the monthly MIR and quarterly review reports.
Ensures all data derived from the wellsite operations is validated.
• Perform cost performance analysis as required and documents all
operations where, technically feasible, more cost effective solutions
exist.
• Ensure dissemination of the performance analysis by inclusion in the
relevant section of the end of well report.
• Closely monitor all incidents of Non-Productive Time (NPT), ensures
full and proper reporting of all incidence of NPT in WIS and end of
well reports and reviews to capture cost implications and learning
points.
• Maintain regular contact with drilling contractor and service
company representatives to ensure mutual understanding of operational
requirements as well as to identify opportunities for quality
improvements.
Skill/Competence
• Possession of a valid IWCF certificate at combined surface and
sub-sea supervisor level.
• Attendance of relevant Advanced Drilling Techniques course
• Good interpersonal relations and communication skills as well as
good working knowledge of well engineering software packages are also
required.
• Able to work in teams while maintaining the capability and
flexibility for independent action
• Selected candidates will be encouraged to follow the Shell Group
“Round 2? Distance Learning Programme with the aim of obtaining this
qualification within two years.
Minimum Qualifications and experience required
• A university degree in Engineering or any other related engineering
discipline.
• Minimum 8 years Well Engineering experience of which at least 2
years as Drilling Supervisor.
*****************************************************************
WELL ENGINEER DESIGN
• To support the Asset teams with activities related to Field
Development Plans and development of Well Data Packs.
• Work in multi-disciplined teams with Geologists, Reservoir Engineers
and Production Technologists on field development studies.
• Introducing new/novel technology into the well delivery process with
the main objective of reducing technical cost.
• Has a responsibility to provide input into the Asset Reference Plan.
• BSP has existing, challenging projects ahead including ERD wells,
Smart completions, Complex trajectories,managed pressure drilling,
Casing drilling, Expandables, etc.
Principle Accountabilities
Health, Safety and Environment (HSE)
• Ensures full compliance with the BSP HSE policies and procedures,
HSE Standards and all other appropriate HSE documentation.
• Conduct relevant HSE-Critical activities.
• Sets a clear leadership example and promotes a high degree of HSE
awareness among subordinates.
• Reviews effectiveness of rig HSE management.
• Provides input to the Well Engineering HSE Plan and is accountable
for follow-up and documented close-out of individual and subordinates’
action points identified in plan.
Upfront Well Planning
• Strives for full adherence to the Company Well Delivery Process
description and the associated time line.
• Assists in Field Development Planning work (Well engineering input)
for development projects.
• Prepares departmental input for well proposals and ensures that the
well proposals are optimised with respect to well quality, HSE and
cost efficiency, through Unit Cost Challenge sessions and Shared
Objective Workshops.
• Designs wells (conceptual designs), generates cost estimates Level 1
& 2. and manages the generation of activity proposals.
• Prepares proposed activities in full compliance with Company
procedures, policies and guidelines.
• Initiates and implements new techniques to improve performance and
actively pursues input from the technology section.
Field Development Planning and Technology Support
• Participates in feasibility studies, to identify projects, which
meet companies screening criteria.
• For those studies which meet the criteria deliver well engineering
input in to the FDP.
• Responsible for selecting new and novel ideas with the view to
introduction into the Company’s operations.
• Co-ordinate/liaise with the service industry on new developments,
introducing field trials into operations as appropriate.
• Responsible for identifying new technology opportunities with the
potential for breakthrough performance in the Company’s
• Continuously update knowledge of new technologies and developments
by attending appropriate courses,seminars, workshops and conferences.
Contract Management
• Ensures continuity in contractual coverage for well engineering
equipment, material and services normally covered under the contracts.
• Ensures contract expenditure is monitored along with other Key
Performance Indicators (KPI).
• Identifies the need for contract variations for equipment, materials
and services not covered under the contract,initiates variations and
ensures variations are timely in place.
Management of Costs
• Responsible for compilation and submission of Cost Estimates for the
activity proposals, using the approved procedures and formats (software).
• Verifies all available cost data for inclusion in cost estimates to
ensure required accuracy is achieved.
• Liaise with Business Planning & Economics and sub-surface team on
the economic viability of a well.
New Technology
• Where applicable review and introduce new technology into the Asset.
• Make use of global lateral learning through wells global network and
import best practice.
• Will be appointed with introducing new technology into the well
delivery process with the main objective to reduce UTC.
• Promotes performance of Well Engineering department within the
Company and globally.
Staff Development, Mentorship
• Mentors and supports selected young graduate staff with a view to
assist them in developing into mature, balanced, assertive and
motivated engineers.
• Develops individual Performance Records, including target setting
and review and compiles annual performance review reports.
• Develops individual development plans and represents them in the
annual performance and potential review cycle.
• Advises, instructs, guides and motivates subordinate staff in the
efficient performance of their duties.
• Ensures that meaningful Performance Records are written and review
takes place for all subordinates.
Networking
• Maintains regular contact with Well Delivery Team, drilling
contractor and service company representatives to ensure mutual
understanding of latest operational capabilities and opportunities,
which could be implemented in projects,as well as to identify
opportunities for quality improvements.
• Maintains regular contact with other Asset Teams, both within and
outside the assigned Asset Unit.
• Maintains an international network of contacts, to pass on learning
and to keep abreast of the latest developments in new technologies and
best practices.
• Updates local and global learning databases with experienced gained.
Skill/Competence
• Possession of a valid IWCF certificate at combined surface and
sub-sea supervisor level.
• Attendance of relevant Advanced Drilling Techniques course
• Good interpersonal relations and communication skills as well as
good working knowledge of well engineering software packages are also
required.
• Able to work in teams while maintaining the capability and
flexibility for independent action
• Selected candidates will be encouraged to follow the Shell Group
“Round 2? Distance Learning Programme with the aim of obtaining this
qualification within two years.
Minimum Qualifications and experience required
• A university degree in Engineering or any other related engineering
discipline.
• Minimum 8 years Well Engineering experience of which at least 2
years as Drilling Supervisor (DSV) and 2 years as Well Operations
Engineer.
*****************************************************************
Bryant
HR Consultant
CHIS International Group Of Companies
HQ
12A-3-7, Jln Seri Jati 1, Off Jln Puchong,
Taman Sri Jati, 58200, Kuala Lumpur, Malaysia
Phone: ++603 7785 5537 ext: 104 Fax: ++60 7783 5537
Mob: ++6017- 308 9537
Email: bryant@chisgroup.com
Intererested candidates who fits the requirement and wiling to
relocate, please forward your updated cv with current,
expected salary and availability to bryant@chisgroup.com
Only shortlisted candidates will be notified…
PRODUCTION SEISMOLOGIST
PRODUCTION GEOLOGIST
PETROPHYSICS ENGINEER
PRODUCTION TECHNOLOGIST
RESERVOIR ENGINEER
DRILLING SUPERVISOR
WELL ENGINEER OPERATIONS
WELL ENGINEER DESIGN
PRODUCTION SEISMOLOGISTTo carry out integrated seismic interpretation
studies (including contributions to special geophysical and geological
review studies) and to provide seismic support within a
multi-disciplinary team environment to the appraisal, development and
reservoir management. The position covers a broad range of
responsibilities aimed at optimising the value of the water injection
scheme.
Principle Accountabilities
• Identification, quantification and optimisation of secondary
recovery (water injection) opportunities in a mature
area.
• Planning and timely execution of multidisciplinary geological
studies carried out to a high standards. This
includes involvement in the delivery of well proposals, well resumes
and drilling activities.
• Initiation of and contribution to special geophysical studies
together with the geophysical section
• Involved in the Company’s Static Reservoir Model Review Panel
• Contribution to well proposals and monitoring during drilling
operations as well as the updating of geological/geophysical models
after drilling.
• Identification of requirements for data gathering and (integrated)
study work to pursue above opportunities.
• Provide input and advice for operational activities and to well
planning and well evaluations.
• Mentoring & developing young Brunei staff will be an integral part
of job.
Minimum Qualifications and experience required
• A degree in Geoscience or equivalent.
• Minimum of 8 years of experience in 3D seismic interpretation.
*****************************************************************
PRODUCTION GEOLOGIST
To provide comprehensive production and reservoir geology input within
a multi-disciplinary team environment into a full field development
studies with primary focus on maturing water flood opportunities.
Principle Accountabilities
• Work in close collaboration with multi-disciplinary team consisting
of production geophysicists & geologist,reservoir engineers,
production Technologists, Petrophysicist, well engineers and front-end
facilities engineers supported by technical assistants, study team
leader and the development leadership team to define the work scope
• Contribute to the planning and scheduling of study project and on
the key milestones such as reviews/challenge sessions, VARs, reserves
booking and reporting. Familiarity of the OPMG, V2V and the VAR
process is an advantage.
• Participate in internal and external reviews as well as audits on
studies and resource volumes, VARs- Perform basic data collection for
the study, QC and validation
• Identify, quantify and optimise secondary recovery (water injection)
opportunities in a mature area. The work will include detailed
integrated reservoir geological modelling.
• Carry out all required evaluations prior to the start of 3D static
modelling.
• Identify and assess risks and uncertainties, apply multiple
scenarios approach in the field development planning study leading to
the maturing of the development concept
• Contribute to the field development plan documentation.
• Provide support to the 3D seismic interpretation as required.
• Firm up further oil development and water injection drilling
targets, prepare the well data packs and monitor the drilling activities.
• Provide input and advice for operational activities (e.g. well
proposals, logging, testing) and well planning and evaluations.
• Mentoring & developing young Bruneian staff will be an integral part
of the job.
Skill/Competence
• Previous experience on water injection projects is highly desirable.
• Experience with static reservoir modelling is a must (preferably
able to use PETREL), experience in 3D seismic
interpretation and drilling operations (geo-steering) is desirable.
• Able to work effectively as part of a dynamic, high-performing,
multi-discipline team.
• Able to effectively communicate across all levels of the interfacing
departments and to senior management.
• A proven ability to apply innovative and cost-effective ways of
working is expected.
Minimum Qualifications and experience required
• A degree in Geology or equivalent.
• Minimum of 8 years of experience in 3D seismic interpretation.
**************************************************
PETROPHYSICS ENGINEER
To provide petrophysical engineering support within a
multi-disciplinary team environment to the appraisal, development,
reservoir studies and management of the assets within the Company’s
Asset Units.
Principle Accountabilities
• Review and analyse all available petrophysical data of his area of
studies, enhance and validate petrophysical
interpretation in order to optimise use and integration of data in the
construction of static and dynamic reservoir models.
• Provide correct integration of petrophysical information,
understanding and requirements into development plans and activity
proposals.
• Translate well objectives and business requirements into
fit-for-purpose, cost effective data acquisition strategy and programs.
• Provide operational input and support to well and reservoir
surveillance activities, e.g. well reviews, cased hole data
acquisition for reservoir monitoring, well engineering operations
planning and support, including well-site operations where necessary.
• Co-ordinate and QA/QC petrophysical log and core data acquisition
activities, and provide operational petrophysical support and
evaluation of new data acquired.
• Ensure the integrity of the corporate log database.
• Keep up to date with new technology developments within the
discipline and acquire other Petroleum Engineering disciplines basic
knowledge to allow an active participation in multidisciplinary groups.
• Coaching, mentoring & developing local Bruneian staff will be an
integral part of the job.
Skill/Competence
• Petrophysics - Skill
• Geophysics (+quantitative interpretation) - Knowledge
• Geology - Knowledge
• Reservoir engineering - Knowledge
• A proven ability to apply innovative and cost-effective ways of
working is expected.
Minimum Qualifications and experience required
• A degree in Petroleum/Chemical Engineering degree or any other
engineering/science degree
• Minimum of 8 years of experience in petrophysical and subsurface
engineering, including well-site operations experience/exposure.
• Broad experience in various logging technology and petrophysical
interpretation technique, including open hole,cased hole and core-log
evaluation.
• Experienced in Petrophysics data management and integration.
*****************************************************************
PRODUCTION TECHNOLOGIST
To provide comprehensive Production Technology expertise to the
subsurface study team in a Petroleum Engineering organisation.
Principle Accountabilities
• Provide production technology input into the study team to ensure
project value is maximised.
• Perform studies covering but not limited to sand management, smart
well deployment, completion and stimulation design.
• Implement fit-for-purpose technologies to maximise project value
• Lead a project through the well delivery process.
• Provide Production Technology input in VARs, RtLs and peer assists,
as required.
• Coaching, mentoring & developing local Bruneian staff will be an
integral part of the job.
Skill/Competence
• A good team player with track record in conducting Production
Technology studies. Experience in oil rim development and gas cap
blowdown studies would be an advantage.
• Excellent inter-personal and team skills. Experience working in a
multi-discipline and/or multi-cultural team would be advantage.
• A proven ability to apply innovative and cost-effective ways of
working is expected.
Minimum Qualifications and experience required
• A university degree in Engineering or any other related engineering
discipline.
• Minimum of 8 years in Production technology experience with field
development planning experience.
• Proficient in the use of the following tools; Prosper, IPM, Welcat.
Experience in PWRI-frac, FIST, STIM2001 and Shellfrac would be an
advantage.
*****************************************************************
RESERVOIR ENGINEER
To provide reservoir engineering contribution within a
multi-disciplinary team environment to the appraisal, development
and reservoir management of the fields. The job covers a broad range
of responsibilities including carrying out reservoir studies with the
objectives of optimising Asset performance and maximising economic
hydrocarbon recovery of the fields.
Principle Accountabilities
• Identify and quantify opportunities for appraisal, development,
production optimization and utilization of new technologies and tools.
The work may include integrated development studies utilizing detailed
integrated reservoir simulation studies and economic evaluations.
• Implement approved appraisal / development plans, and production
policies.
• Surveillance and optimisation of existing developments viz.
Identification of data gathering requirements, andproviding input and
advice for operational activities (e.g. logging, testing) and to well
operations planning and well evaluations.
• Ensure that reservoir engineering data and documentation pertaining
to the allocated reservoirs are validated and stored in a retrievable
manner.
• Support and contribute to the Hydrocarbon resource volume and
production forecasting administration, and annual Business Plan processes.
• Liaison with the shareholders to ensure timely value assurance,
budget approvals and performance reporting.
• Participate in peer assists both within Company and regionally (VtV,
VARs)
• Coaching, mentoring & developing local Bruneian staff will be an
integral part of the job.
Skill/Competence
• Experience in mature field management and secondary recovery processes.
• Experience with Exploration/Appraisal support.
• Broad experience in analytical and reservoir simulation modelling
(1D to 3D).
• Have completed all basic Core Discipline training (Reservoir
Engineering).
Minimum Qualifications and experience required
• A degree in Petroleum/Chemical Engineering degree or any other
engineering/science degree.
• Minimum of 8 years of Reservoir Engineering, including well-site
drilling and logging / well testing operations experience.
• Broad experience in various logging technology and petrophysical
interpretation technique, including open hole,cased hole and core-log
evaluation.
• Experienced in Petrophysics data management and integration.
*****************************************************************
DRILLING SUPERVISOR
• The Drilling Supervisor is responsible for the day-to-day on Site
planning and execution of drilling, completion and workover
activities, maintaining maximum Health, Safety and Environment (HSE)
and operational efficiency, at maximum value in terms of cost versus
benefits.
• Responsible for implementation of all the company’s policies,
procedures and guidelines on drilling operations,safety and
environmental protection.
• Representative on Site and is responsible for first line response
and problem solving of non planned operations.
• Provides guidance and advice to Well-site Drilling Engineers and
Assistant Drilling Supervisors and takes an active role in their
training and development.
Principle Accountabilities
• Supervise the execution of drilling, completion and workover
activities.
• Supervise the drilling contractors and service personnel to ensure
all work performed conform to safety,quality and highest value
requirements and in accordance with the well programme.
• Responsible for day-to-day optimisation of activities and provision
of first line action and problem solving in case of unexpected events.
• Provide sufficient, accurate and timely data to office based Well
Delivery Team members.
• Co-ordinate the timely supply of required equipment, consumables and
specialist services to ensure uninterrupted continuation of operations.
• In order to broaden his experience and develop his communication
skills, he may be assigned to high profile drilling activities such as
HPHT and or Deep Water Exploration Drilling.
Health, Safety and Environment (HSE)
• Ensure full Well-site compliance with the Company HSE policies and
standards.
• Conduct relevant HSE-Critical activities.
• Ensure all personnel are fully conversant with, and strictly adhere
to, their responsibilities as detailed in the
Safety Case for the respective installation.
• Set a clear leadership example and promotes a high degree of HSE
awareness among subordinates.
• Review effectiveness of rig HSE systems by inspection and audit.
Reviews effectiveness of rig HSE
communication by line inspection.
• Promote the practical implementation of the Hazard and Effects
Management Process (HEMP).
• Fulfill tasks identified in the departmental HSE Plan.
• Co-ordinate activities on the rig affecting HSE matters.
• Ensure all non-routine hazardous work is performed under the permit
to work (PTW) system.
• Ensure all near miss incidents and incidents resulting in injury or
damage to assets, equipment or the
environment are reported and that assigned incidents and near miss
events are investigated, reported and documented.
• Shall be certified PTW Authorised Signatory.
Emergency Response
• Co-ordinate the Company’s response at the Site and as On-Scene
Representative to assists the Drilling
Contractor in his function as On-Scene Commander in dealing with an
emergency.
• Is fully conversant with Company and Contractor Emergency Response
Procedures and ensures the rig and
Contractor is fully prepared for an emergency.
• Test rig site emergency preparedness at regular intervals. Shall
have attended the Company On-Scene
Commander course and be assessed competent, within 6 months of
assuming the function.
Concurrent Production and Rig Activities (CPRA)
• Is familiar with Concurrent Production and Rig Activity (CPRA)
procedures (TMS-4) and the platform specific
CPRA Safety Case and ensures that all operations are performed in full
compliance with these procedures.
• Supervise non Well Engineering staff and contractors in execution of
CPRA Third Activities.
• Take a pro-active role in the preparation and execution of CPRA
activities and ensures the weekly CPRA.
Personnel
• Promote an atmosphere of mutual trust and respect amongst all
personnel onboard the work unit or at the
drilling site.
• Provide active support to Well-site Drilling Engineers in their
development efforts, in particular in preparation for
their professional certification examinations.
• Train new Well-site Drilling Engineers in their prime roles and
responsibilities, in particular logistics
management, filing and reporting. Participates in staff appraisal
exercises.
Reporting of daily operations
• Report directly to the Well Delivery Team but functionally reports
to the Senior Drilling Engineer on all matters
pertaining to the conduct of operations at the Well-site in accordance
with the requirements of the Well Engineering
Manual.
• Input and verifies the accuracy of Well Information System (WIS)
daily drilling reports.
• Responsible for processing end of well reports, as per Well
Engineering Manual standards, for selected wells.
Contract management
• Responsible for the implementation of all relevant contracts and
their variations.
• Responsible for the monitoring and reporting of contractor service
quality.
• Inform contract holders of all service provision deficiencies and
contractor non-compliance.
Personal Development
• Maintain an active interest in and familiarizes with operations.
• Is present during the Drilling the Well on Paper (DWOP) and other
meetings taking place as part of the activity
planning process.
• Maintains the Skills Portfolio Logbook up to date.
• Performs small office based projects in well engineering subjects
during time off.
Management of costs
• Responsible for the daily expenditure and reporting using cost
reporting facility.
• Calculate the cost of services execution based on the job execution
record and contract rates.
• Minimise equipment rental time and personnel on board by the timely
and efficient transfer of materials and
personnel to and from the rig.
• Has full authority for call out of equipment and personnel.
Close out, reporting and performance monitoring
• Provide data, assists in the preparation of, and conducts well
review presentations.
• Ensure well file is kept up to date.
• Provide recommendations for improvement of the WIS and cost
reporting system, the accounts guide / coding
system and drilling rig / drilling service contracts.
• Assist in longer term operational decision making, performs cost
benefit analysis on all programmed
operational steps to ensure cost efficient operation, suggests
alternative procedures when appropriate cost benefits are
perceived.
Skill/Competence
• Possession of a valid IWCF certificate at combined surface and
sub-sea supervisor level.
• Attendance of relevant Advanced Drilling Techniques course
• Good interpersonal relations and communication skills as well as
good working knowledge of well engineering
software packages are also required.
• Able to work in teams while maintaining the capability and
flexibility for independent action
• Selected candidates will be encouraged to follow the Shell Group
“Round 2? Distance Learning Programme with
the aim of obtaining this qualification within two years.
Minimum Qualifications and experience required
• A university degree in Engineering or any other related engineering
discipline.
• Minimum 8 years Well Engineering experience of which at least 2
years as Drilling Supervisor.
*****************************************************************
WELL ENGINEER OPERATIONS
• To provide detailed planning and programming of drilling, completion
and workover activities to deliver “fit for
purpose” wells at maximum value in terms of cost versus benefits,
which meet the requirements of the Development
and/or Exploration function while adhering to Company’s policies,
procedures and guidelines on well delivery operations.
• To implement the “Delivering The Limit (DTL)” methodology. Organise
and facilitate challenge sessions
DWOP’s and AAR’s for their projects and act as operations engineer
through execution phase on some projects, for
which the “cradle to grave” principle can be applied.
• Maintain and monitor the companies lessons learned database and
ensure transfer of knowledge across the rig
teams.
• Identify opportunities to implement cost saving / value enhancing
breakthrough performance in designs with application of radical
techniques.
• Make use of global lateral learning through wells global network and
import best practice.
• To ensure Company’s HSE objectives are met.
Principle Accountabilities
Health, Safety and Environment (HSE)
• Ensures full compliance with the company’s HSE policies and
procedures as detailed in the Safety Management
System, HSE Standards and all other appropriate HSE documentation.
• Conduct relevant HSE-Critical activities as specified in the
HSE-Critical Activities Register
• Set a clear leadership example and promotes a high degree of health,
safety and environmental awareness
among subordinates.
• Review effectiveness of rig HSE management by line inspection.
Provides input to the department HSE Plan and
is accountable for follow-up and documentation of close-out of
individual and subordinates’ action points, identified in the HSE plan.
• Fully brief well-site personnel prior to safety critical /
non-routine activities such as CPRA and well testing.
• Co-ordinate the follow-up and close-out of rig related action points
resulting from near miss and incident reports and HSE visits and audits.
• Encourage well site staff in hazard awareness and risk assessment,
generation of hazard-, near miss- and incident reports, by continuous
attention and communication.
Well Planning & Execution of Operations
• Strive for full adherence to the Company Well Delivery Process
description and the associated time line
• Prepare departmental input for well proposals and ensures well
proposals are optimised with respect to well
quality, HSE and cost efficiency.
• Design wells and manages the generation of fit for purpose well
programmes.
• Maintain close liaison with the Material Scheduler to ensure forward
planning for all non-standard direct charge
material requirements ascertained from preparation of well proposals
and/or well programmes.
• Supervise and direct well-site personnel in the execution of the
ongoing and planned well operations.
• Plan and execute all well operations in full compliance with Company
procedures, policies and guidelines.
• Provide timely and accurate information to other departmental units
on operational status and any deviations
from plans, programmes, policies, procedures or guidelines.
• Facilitate short term planning and scheduling of personnel,
equipment and services required for the well operations under his
control. Ensures update of well files such as operations progress,
writing of end of well reports and reporting / documentation of
non-standard or irregular operations and events.
Concurrent Production and Rig Activities (CPRA)
• Manage CPRA involving the rig for which he is responsible.
• Ensure that the platform specific CPRA Safety Case has been issued
and the requirements have been implemented prior to starting CPRA.
• Ensure full compliance with CPRA procedures for the duration of
CPRA. Monitors co-ownership production deferment booked against CPRA
activities.
Well Tie-In
• Manage well tie-in involving the rig for which he is responsible.
• Ensure that the all approvals have been obtained and that adequate
procedures and documentation is available on the rig prior to prior to
starting well tie-in.
• Liaise with Engineering and Construction departments in matters
involving preparation for and execution of well tie-in activities.
Rig Move and Platform Access
• Schedule and attend rig move meetings and liaises with other
departments during the preparation of the actual rig move.
• Ensure rig move, involving the rig are planned and discussed with
all parties prior to execution of rig move operations.
• Verify and ensure well integrity in line with the company’s
procedures prior to performing any heavy lifts and/or approaching a
platform/well jacket with his rig.
• Ensure platform/well jacket is handed over in accordance with
procedures.
Management of Costs
• Review contents of the well proposal and challenges all aspects
where alternative more cost effective solutions are available to meet
the technical demands and requirements of the well objectives
• Compilation and submission of the Level 3 and Value of Work Done
(VOWD) Cost Estimates using the approved procedures and formats
(software).
• Challenge and verifies all available cost data for inclusion in cost
estimates to ensure required accuracy is
achieved. Monitors and challenges the reported daily cost using the
approved cost reporting facilities.
• Monitor the accumulating well cost versus the planned cost,
reporting all variances to the departmental units as appropriate.
• Prepares any programme amendment costings as required and ensures
necessary approvals are obtained.
Close Out, Reporting & Performance Monitoring
• Ensure the Drilling Supervisor prepares end of the well reports in
the approved format.
• Provide feedback to other departmental units on the use and
recommendations for improvement of the software programmes in place.
• Provide feedback to the contracts section on the use and
recommendations for improvement of the drilling rig and drilling
service contracts.
• Provide input for the monthly MIR and quarterly review reports.
Ensures all data derived from the wellsite operations is validated.
• Perform cost performance analysis as required and documents all
operations where, technically feasible, more cost effective solutions
exist.
• Ensure dissemination of the performance analysis by inclusion in the
relevant section of the end of well report.
• Closely monitor all incidents of Non-Productive Time (NPT), ensures
full and proper reporting of all incidence of NPT in WIS and end of
well reports and reviews to capture cost implications and learning
points.
• Maintain regular contact with drilling contractor and service
company representatives to ensure mutual understanding of operational
requirements as well as to identify opportunities for quality
improvements.
Skill/Competence
• Possession of a valid IWCF certificate at combined surface and
sub-sea supervisor level.
• Attendance of relevant Advanced Drilling Techniques course
• Good interpersonal relations and communication skills as well as
good working knowledge of well engineering software packages are also
required.
• Able to work in teams while maintaining the capability and
flexibility for independent action
• Selected candidates will be encouraged to follow the Shell Group
“Round 2? Distance Learning Programme with the aim of obtaining this
qualification within two years.
Minimum Qualifications and experience required
• A university degree in Engineering or any other related engineering
discipline.
• Minimum 8 years Well Engineering experience of which at least 2
years as Drilling Supervisor.
*****************************************************************
WELL ENGINEER DESIGN
• To support the Asset teams with activities related to Field
Development Plans and development of Well Data Packs.
• Work in multi-disciplined teams with Geologists, Reservoir Engineers
and Production Technologists on field development studies.
• Introducing new/novel technology into the well delivery process with
the main objective of reducing technical cost.
• Has a responsibility to provide input into the Asset Reference Plan.
• BSP has existing, challenging projects ahead including ERD wells,
Smart completions, Complex trajectories,managed pressure drilling,
Casing drilling, Expandables, etc.
Principle Accountabilities
Health, Safety and Environment (HSE)
• Ensures full compliance with the BSP HSE policies and procedures,
HSE Standards and all other appropriate HSE documentation.
• Conduct relevant HSE-Critical activities.
• Sets a clear leadership example and promotes a high degree of HSE
awareness among subordinates.
• Reviews effectiveness of rig HSE management.
• Provides input to the Well Engineering HSE Plan and is accountable
for follow-up and documented close-out of individual and subordinates’
action points identified in plan.
Upfront Well Planning
• Strives for full adherence to the Company Well Delivery Process
description and the associated time line.
• Assists in Field Development Planning work (Well engineering input)
for development projects.
• Prepares departmental input for well proposals and ensures that the
well proposals are optimised with respect to well quality, HSE and
cost efficiency, through Unit Cost Challenge sessions and Shared
Objective Workshops.
• Designs wells (conceptual designs), generates cost estimates Level 1
& 2. and manages the generation of activity proposals.
• Prepares proposed activities in full compliance with Company
procedures, policies and guidelines.
• Initiates and implements new techniques to improve performance and
actively pursues input from the technology section.
Field Development Planning and Technology Support
• Participates in feasibility studies, to identify projects, which
meet companies screening criteria.
• For those studies which meet the criteria deliver well engineering
input in to the FDP.
• Responsible for selecting new and novel ideas with the view to
introduction into the Company’s operations.
• Co-ordinate/liaise with the service industry on new developments,
introducing field trials into operations as appropriate.
• Responsible for identifying new technology opportunities with the
potential for breakthrough performance in the Company’s
• Continuously update knowledge of new technologies and developments
by attending appropriate courses,seminars, workshops and conferences.
Contract Management
• Ensures continuity in contractual coverage for well engineering
equipment, material and services normally covered under the contracts.
• Ensures contract expenditure is monitored along with other Key
Performance Indicators (KPI).
• Identifies the need for contract variations for equipment, materials
and services not covered under the contract,initiates variations and
ensures variations are timely in place.
Management of Costs
• Responsible for compilation and submission of Cost Estimates for the
activity proposals, using the approved procedures and formats (software).
• Verifies all available cost data for inclusion in cost estimates to
ensure required accuracy is achieved.
• Liaise with Business Planning & Economics and sub-surface team on
the economic viability of a well.
New Technology
• Where applicable review and introduce new technology into the Asset.
• Make use of global lateral learning through wells global network and
import best practice.
• Will be appointed with introducing new technology into the well
delivery process with the main objective to reduce UTC.
• Promotes performance of Well Engineering department within the
Company and globally.
Staff Development, Mentorship
• Mentors and supports selected young graduate staff with a view to
assist them in developing into mature, balanced, assertive and
motivated engineers.
• Develops individual Performance Records, including target setting
and review and compiles annual performance review reports.
• Develops individual development plans and represents them in the
annual performance and potential review cycle.
• Advises, instructs, guides and motivates subordinate staff in the
efficient performance of their duties.
• Ensures that meaningful Performance Records are written and review
takes place for all subordinates.
Networking
• Maintains regular contact with Well Delivery Team, drilling
contractor and service company representatives to ensure mutual
understanding of latest operational capabilities and opportunities,
which could be implemented in projects,as well as to identify
opportunities for quality improvements.
• Maintains regular contact with other Asset Teams, both within and
outside the assigned Asset Unit.
• Maintains an international network of contacts, to pass on learning
and to keep abreast of the latest developments in new technologies and
best practices.
• Updates local and global learning databases with experienced gained.
Skill/Competence
• Possession of a valid IWCF certificate at combined surface and
sub-sea supervisor level.
• Attendance of relevant Advanced Drilling Techniques course
• Good interpersonal relations and communication skills as well as
good working knowledge of well engineering software packages are also
required.
• Able to work in teams while maintaining the capability and
flexibility for independent action
• Selected candidates will be encouraged to follow the Shell Group
“Round 2? Distance Learning Programme with the aim of obtaining this
qualification within two years.
Minimum Qualifications and experience required
• A university degree in Engineering or any other related engineering
discipline.
• Minimum 8 years Well Engineering experience of which at least 2
years as Drilling Supervisor (DSV) and 2 years as Well Operations
Engineer.
*****************************************************************
Bryant
HR Consultant
CHIS International Group Of Companies
HQ
12A-3-7, Jln Seri Jati 1, Off Jln Puchong,
Taman Sri Jati, 58200, Kuala Lumpur, Malaysia
Phone: ++603 7785 5537 ext: 104 Fax: ++60 7783 5537
Mob: ++6017- 308 9537
Email: bryant@chisgroup.com
